datahub/docs/docker/development.md

# Using Docker Images During Development

We've created a special `docker-compose.dev.yml` override file that should configure docker images to be easier to use
during development.

Normally, you'd rebuild your images from scratch with a combination of gradle and docker compose commands. However,
this takes way too long for development and requires reasoning about several layers of docker compose configuration
yaml files which can depend on your hardware (Apple M1).

The `docker-compose.dev.yml` file bypasses the need to rebuild docker images by mounting binaries, startup scripts,
and other data. These dev images, tagged with `debug` will use your _locally built code_ with gradle.
Building locally and bypassing the need to rebuild the Docker images should be much faster.

We highly recommend you just invoke `./gradlew quickstartDebug` task.

```shell
./gradlew quickstartDebug
```

This task is defined in `docker/build.gradle` and executes the following steps:

1. Builds all required artifacts to run DataHub. This includes both application code such as the GMS war, the frontend
   distribution zip which contains javascript, as well as secondary support docker containers.

1. Locally builds Docker images with the expected `debug` tag required by the docker compose files.

1. Runs the special `docker-compose.dev.yml` and supporting docker-compose files to mount local files directly in the
   containers with remote debugging ports enabled.

Once the `debug` docker images are constructed you'll see images similar to the following:

```shell
acryldata/datahub-frontend-react                 debug              e52fef698025   28 minutes ago   763MB
acryldata/datahub-kafka-setup                    debug              3375aaa2b12d   55 minutes ago   659MB
acryldata/datahub-gms                            debug              ea2b0a8ea115   56 minutes ago   408MB
acryldata/datahub-upgrade                       debug              322377a7a21d   56 minutes ago   463MB
acryldata/datahub-mysql-setup                   debug              17768edcc3e5   2 hours ago      58.2MB
acryldata/datahub-elasticsearch-setup            debug              4d935be7c62c   2 hours ago      26.1MB
```

At this point it is possible to view the DataHub UI at `http://localhost:9002` as you normally would with quickstart.

Like `quickStartDebug`, there are a few other tasks that bring up a different set of containers, for example
`quickStartDebugConsumers` will also bring up mce-consumer and mae-consumer.

## Reloading

Next, perform the desired modifications

To see these changes in the deployment, a rebuilt of modified artifacts and a restart of the container(s) is required to run with the updated code.
The restart can be performed using following gradle task.

```shell
./gradlew :docker:debugReload
```

This single task will build the artifacts that were modified and restart only those containers that were affected by the rebuilt artifacts.

For each of the `quickStartDebug` variants, there is a corresponding `debugReload` task.
For `quickStartDebugConsumers`, the reload task is `debugConsumersReload`

`debugReload` is generally much faster than re-running `quickStartDebug` and is recommended after an initial bringup of all services via `quickStartDebug` followed
by loading the incremental changes using `debugReload`.

If there are significant changes to the code, for example due to pulling the latest code, it is recommended to start with a `quickStartDebug` and then iterate using `debugReload`

# Setting environment variables via env files

You can define different sets of environment variables for all the containers in an env file. The env files must be located in the `docker/profiles` folder.
To use the env file, run

```shell
DATAHUB_LOCAL_COMMON_ENV=my-settings.env ./gradlew quickStartDebug
```

The `debugReload` process continues to work, but the restarted containers will use the same settings that were present at the time of running `./gradlew quickStartDebug`.

If you need to reload the containers with a different env file or changes made to the env file, a task `debugReloadEnv` builds the artifacts that have code changes
and recreates all the containers that refer to these the env file via the DATAHUB_LOCAL_COMMON_ENV environment variable.

`debugReloadEnv` also has variants for all the `quickStartDebug` variants. For example, `quickStartDebugConsumers` has `debugConsumersReloadEnv`

## Start/Stop

The following commands can pause the debugging environment to release resources when not needed.

Pause containers and free resources.

```shell
docker compose -p datahub stop
```

Resume containers for further debugging.

```shell
docker compose -p datahub start
```

## Debugging

The default debugging process uses your local code and enables debugging by default for both GMS and the frontend. Attach
to the instance using your IDE by using its Remote Java Debugging features.

Environment variables control the debugging ports for GMS and the frontend.

- `DATAHUB_MAPPED_GMS_DEBUG_PORT` - Default: 5001
- `DATAHUB_MAPPED_FRONTEND_DEBUG_PORT` - Default: 5002

### IntelliJ Remote Debug Configuration

The screenshot shows an example configuration for IntelliJ using the default GMS debugging port of 5001.

<p align="center">
  <img width="70%"  src="https://raw.githubusercontent.com/datahub-project/static-assets/main/imgs/development/intellij-remote-debug.png"/>
</p>

## Tips for People New To Docker

### Accessing Logs

It is highly recommended you use [Docker Desktop's dashboard](https://www.docker.com/products/docker-desktop) to access service logs. If you double click an image it will pull up the logs for you.

### Quickstart Conflicts

If you run quickstart, use `./gradlew quickstartDebug` to return to using the debugging containers.

### Docker Prune

If you run into disk space issues and prune the images & containers you will need to execute the `./gradlew quickstartDebug`
again.

### System Update

The `datahub-upgrade` job will not block the startup of the other containers as it normally
does in a quickstart or production environment. Normally this is process is required when making updates which
require Elasticsearch reindexing. If reindexing is required, the UI will render but may temporarily return errors
until this job finishes.

### Running a specific service

`docker-compose up` will launch all services in the configuration, including dependencies, unless they're already
running. If you, for some reason, wish to change this behavior, check out these example commands.

```
docker-compose -p datahub -f docker-compose.yml -f docker-compose.override.yml -f docker-compose-without-neo4j.m1.yml -f docker-compose.dev.yml up datahub-gms
```

Will only start `datahub-gms` and its dependencies.

```
docker-compose -p datahub -f docker-compose.yml -f docker-compose.override.yml -f docker-compose-without-neo4j.m1.yml -f docker-compose.dev.yml up --no-deps datahub-gms
```

Will only start `datahub-gms`, without dependencies.